In some cases, once you connect your PC/laptop to the hand control, a driver will be automatically loaded. If so, a serial port will then be present on your PC/laptop. If you do not find a serial port present after making this connection, you should manually load the driver. The adapter inside the hand control uses a Prolific PL2303 chipset. This is because the vendor provided drivers always seem to be out of date. However, the drivers from Prolific don’t work with all cables out of the box. I’m going to show you how to fix that. Get the Driver. If you haven’t already, hop over to the Prolific site to download the driver and install it.
High-end macOS drivers for your PL-2303, CH341 and CP2102 USB to Serial devices
Sunday, we offer a special discount of 42%. Buy the driver for €6.90 instead of €11.98!The best driver
Have you been struggling to get your serial device to work? This high-end driver will end your troubles and gets you your working device!
No quick hacks, or security bypasses to get the driver operating.
Driver Pl2303 Download
Download the free Serial Detect App to check if your device is supported.
Easy installationDriver Prolific Usb To Serial
Time-saving hassle-free installation via package installer. No need to use the Terminal.
Safe 30-day guarantee: If the device will not work after support, you get your money back.
Works with macOS 10.15 Catalina. Catalina and Mojave drivers are notarized. Legacy drivers (signed) for OS X 10.13, 10.12. 10.11 , 10.10/10.9, 10.8, 10.7, 10.6, 10.5 (PowerPC) are also available.
The Beginners Guide has general help. Click here for the Beginners Guide
If you need Mac-specific help, you are at the right page.
Join the Mailing list & search the archives for similar problem reports & how they were resolved, and/or ask the group. Please include enough info about the problem and situation so the community will be able to help you.
Moving wallpaper mac free download 32-bit. Not all functionality is supported on all radios. See Model Support
As of MacOS 10.9, signed packages are required by default. Apple charges for this capability, and requires use of their tooling to do it. For the time being, MacOS users may need to disable signed package checking for CHIRP. Instructions provided by Jim, K2SON: https://cleverexcel929.weebly.com/blog/publisher-rocket-for-mac-download.
Alternately, you can disable them for your entire system, although this has security implications that should not be ignored. Instructions for this provided by Tom, KD7LXL:
As of 10.12 (Sierra) the UI for disabling app security was removed. The functionality is still there, but must be enabled from the command line. Gotham rounded download free mac.
To whitelist a single application (like an unzipped chirp-daily.app):
Alternately, you can disable them for your entire system, although this has security implications that should not be ignored. Run this command in a terminal:
references: single commandglobal
Unfortunately, Apple has made significant changes in 10.15 which cause major issues for independent software developers. CHIRP is significantly impacted and the future is unclear.
At the very least, Catalina users should use the 'unified' build of the app provided on the download page, which uses the system's 64-bit python runtime. Also note that there are significant limitations on what files unsigned applications can access which makes it very difficult to open, save, find, and otherwise organize image and CSV files with chirp. Please see issue #7147 for the current information about workarounds.
USB to serial cables are not merely wire, they contain small computer circuits at one end of the cable that respond as a USB device and convert the data to serial. These cables are not all the same, so the computer needs a software 'driver' so it can recognize the cable and speak to it correctly. You will need to install one of these 5 below.
FTDI cables¶
Note that with Mac OSX 10.9 'Mavericks', Apple provides their own driver for FTDI chipset. You may need to remove the OEM FTDI driver and use only the Apple FTDI driver, or you may need to disable the Apple FTDI driver and install the OEM FTDI drivers. YMMV.
http://www.ftdichip.com/Drivers/VCP.htm
Version 1.5.1 is available for Mac OS X on 64 bit, 32 bit and PPC machines. Prolific PL-2303 cables - official drivers for the genuine Prolific cables¶
FYI: your cable, if using Prolific chipset, is more likely to be using a counterfeit chip than an original.
http://www.prolific.com.tw/US/CustomerLogin.aspx
Login as guest/ guest & look in the Support section. Specified to work with Mac OSX 10.6, 10.7, & 10.8. Generic PL-2303 cables (counterfeit and/or “Generic”) If you aren't sure what kind of inexpensive cable you have, try this one first.¶For Lion (10.7.x), Mountain Lion (10.8.x), and Mavericks (10.9.x):¶
You can try this one, which install open source pl2303 driver and remove any other driver versions:
http://1drv.ms/Nl68Ru At this web page you may need to right-click or control-click to link to get it to download. After downloading, you may need to control-right click, then open in order to bypass Mac Gatekeeper. For earlier versions of Mac OS X up to 10.5 Leopard. Also some reports of success with Snow Leopard, Lion:¶RTSystems cables¶for OSX 10.9.x (aka Mavericks):¶
see RTSystemsCablesAndMavericks
for OSX < 10.9.x:¶
https://www.rtsystemsinc.com/kb_results.asp?ID=9
http://www.rtsystems.us/downloads/MacDrivers/RTSystemUSBSerialDrivers.pkg.mpkg.zip Silicon Labs CP210x USB to UART Bridge VCP Drivers (including Kenwood TH-D72)¶
WinChipHead CH340 series chipset¶
The WinChipHead CH340 series chipset is not compatible with the Prolific 2303 drivers. Portal 2 mac download cracked. This chipset will report a Product ID of 0x7523 and a Vendor ID of 0x1a86. A signed driver compatible with Yosemite is available from http://blog.sengotta.net/signed-mac-os-driver-for-winchiphead-ch340-serial-bridge/ as the driver offered on the manufacturer's website (in Chinese) is not signed and requires allowing unsigned kernel extensions, which is a significant security risk on OS X.
You can verify that the drivers are installed & working by connecting the USB cable to your Mac, then running “System Profiler”, or “System Information” (found in /Applications/Utilities ). When the USB cable is connected and drivers correctly installed, the cable will show up in the USB section of the System Profiler.
Another way to see that the driver is correctly installed is to open Terminal and type:
It will return a list of virtual serial ports including something similar to:
You may also type:
That will return a long list of kexts, including something similar to this at the bottom (most recently installed are listed last):
Look at the CHIRP log for clues.
Join the Mailing list & search the archives for similar problem reports & how they were resolved, and/or ask the group. Please include enough info about the problem and situation so the community will be able to help you.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |